Operates by gravity....The separator contains a spiral core fed from a large hopper at the top, with an adjustable feed plate. The seed leaving the hopper runs over a cone divider which spreads the feed evenly to each of the five flights in the core. Going down the flights the round kernels travel at a much faster speed than the kernels which are not round. Their momentum increases until the round seeds run over the edge of the inner spirals, drop into the outer spiral, and discharge through a spout at the bottom side of the machine. The non-round seed remains on the small flights and slides down to a separate discharge spout at the bottom center of the unit.
No power required....Since there are no moving parts, no power is required to operate the machine. When the feed has been properly set, the separator continues to operate automatically as long as there is grain in the hopper.
Constructed of galvanized non-rust iron in a strong steel frame.
Different pitched spiral core flighting can be offered.
Flighting can be furnished in Galvanized metal up to 22 gauge and to 26 gauge in Stainless Steel.